.::HIDROMED::.

ETHYLENE OXIDE GAS STERILIZERS

MODEL: EOSTD_KRT 135
DEFINITION

These devices are heat and cold sterilization, 100% ethylene oxide gas. It is designed to perform in disposable cartridges. E T O _ K R T 1 3 5 m o d e l i h e a 100 g metal cartridge for sterilization Sterilization process 37 C, 45 C, It occurs at 55 C or 60 C. The user can select any of these options with the touch keys on the control panel. Standard programs above In addition, the device has a user-defined interface where the user can define the temperature and time. I also have a prog am. This option allows sterilization between 33 ° C and 60 ° C. The sterilization circle has a prismatic structure and its internal dimensions are 40cm x 40cm x 85 cm (length x width x depth).

TECHNICIAL SPECIFICATIONS
CABINET SIDE: Prismatic (135 liters) CABINET AND DOOR AK MATERY ALI: AISI 316 L stainless steel STERILIZATION TEMPERATURE: 33 C - 60 C can be selected with 1 C intervals (max. Deviation: ± 1 C) HUMIDIFICATION: ~ 40% RH (provided by built-in steam generator) CYCLE TIME: (Except the ventilation phase) for 37 C; 7½ hour For 45 C; For 6 hours 55 C; For 4½ hour 60 C; 4 hours STERILIZATION PRESSURE: Sterilization takes place under vacuum under ~ -0.3 bar pressure VACUUM SYSTEM: V acum is provided by built-in water ring and silent vacuum pump BLEEDING TIME: It can be selected by the user between 0-99 hours with 1 hour intervals. CONTROL SYSTEM: Touch user interface, with the help of µ-processor based control panel DISPLAY: LCD graphic display with fluorescent backlight (blue) LOADING: With two adjustable height, perforated stainless steel (AISI 316L) shelves PRINTER: Documenting confirmation of 24 column printer sterilization using for ELECTRICAL SUPPLY: 380 Volt, 50 Hz ± 10% three-phase mains voltage. ENERGY CONSUMPTION: 4 KW (max).

MODEL: EOSTD_KRT 250 LARGE CAPACITY ETO STERILIZER (USES ETO GAS CARTRIDGE FOR STERILIZATION)
&INNER DIMENSIONS: CAP ACID: 250 liters 167-170 gr standard ETO gas for each sterilization cartridge used Single or double door options Same function and control systems as ETO_KRT 135 has. 50cm x 50cm x 100cm (length x width x depth).

EOSTD 300-550 series ethylene oxide gas sterilizers produced by our company It is specially designed for the sterilization of disposable medical materials and equipment that cannot be sterilized at high temperatures. It uses a mixture of ethylene oxide-carbon dioxide gas for sterilized acid. The ratio of the mixture varies from 15% ETO - 85% CO to 90% ET O - 10% CO according to the user's request. Simple use, easy maintenance and service features, reliable security measures It forms the main unit and the latest technology is used in the production of the systems. The loading and unloading of the sterilization cabinet, programming and use of the sterilizer is very short by a minimum of personnel. EOSTD 300 - 550 series sterilizers are produced in 2 different standard models according to their sterilization capacity. Sterilization cabinets are prismatic. Functional and usage characteristics are the same sterilizers are produced upon request). EOSTD 300 - 550 series ethylene oxide gas Sterilizers are used at 4 different temperatures that can be selected by the user (37 C, 45 C, 55 C and 60 C). There is also a "user-defined program" that the user can choose between 33 C - 60 C. When the temperature is selected, I The sterilization time is determined automatically. EOSTD 300: Sterilization capacity of 300 liters (50 cm X 50 cm X 120 cm - uXgXd). EOSTD 550: 550 liters sterilization capacity (60 cm X 60 cm X 155 cm - uXgXd).

TECHNICIAL SPECIFICATIONS
CABINET SIDE: Prismatic (300-550 liters) CABINET AND DOOR AK MATERY ALI: AISI 316 L stainless steel STERILIZATION TEMPERATURE: 33 C - 60 C can be selected with 1 C intervals (max.deviation: ± 1C) HUMIDIFYING: ~ 40% RH (provided by built-in steam generator) CYCLE TIME: (Except the ventilation phase) For 37 C; 7½ hour For 45 C; 6 hours For 55 C; 4½ hours For 60 C; 4 hours STERILIZATION PRESSURE: Sterilization takes place below (+0.8) - (1.8) bar pressure depending on the gas mixture type. V ACUM SYSTEM: V acum is provided by built-in water ring and silent vacuum pump. BLEEDING TIME: It can be selected by the user between 0-99 hours with 1 hour intervals CONTROL SYSTEM: Touch user interface, with the help of µ-processor based control panel DISPLAY: LCD graphic display with fluorescent backlight (blue) LOADING: With two adjustable height, perforated stainless steel (AISI 316L) shelves PRINTER: Document confirmation of 24 column printer sterilization using for ELECTRICAL SUPPLY: 380 Volt, 50 Hz ± 10% three-phase mains voltage. ENERGY CONSUMPTION: 10-12 KW (max).

These devices are designed for sterilization using 100% ETO gas cartridges for low capacity applications. Ethylene oxide gas 30 g standard ETO gas The sterilization chamber is cylindrical and its dimensions are 35 cm x 40. It is made of cm (diameter x depth) and AISI 316 L quality stainless steel. The cover is also made of the same material. The lid gasket is made of a special silicone mixture. The outer coating is painted with electrostatic paint and this paint provides superior protection against acidic and basic environment. Approximate outer dimensions are 65 cm x 50 cm x 65 cm. (length x width x depth) Sterilization process is carried out with standard programs at 37 C and 55 C, depending on the user selection.

TECHNICIAL SPECIFICATIONS
Sterilization Capacity: 40 liters Cabinet Dimensions: 35cm x 40cm cylindrical (diameter x depth) Outer Dimensions (approx.): 65cm x 50cm x 65cm (length x width x depth) Sterilization Temperature: Cold: 37 C, hot: 55 C Gas Per Sterilization: 30 g, 100% ethylene oxide gas (cartridge) Sterilization Time: Cold mode: 7 hours, hot mode: 4 hours Process Control System: Microprocessor based control Material: AISI 316L quality stainless steel Electrical Supply: 380 volts, 50 Hz ± 10% three phase Energy Consumption: Maximum 2 KW. Water Source: Tap water (1/2 "pipe) Drain: 1/2 "out of the main drain

INDUSTRIAL TYPE, LARGE CAP ACID ETO GAS STERILIZATION TORS USE ETO-CO GAS MIXING CYLINDER FOR STERILIZATION.
CAPACITY: 1 m - 10 m EX-proof electrical installation and structure All program parameters can be controlled by the user. PC synchronization can be achieved with the software provided. (RS 485 connection) Includes validity programs. For dimensions and features of this model, please contact the manufacturer or dealer.

USE FOR THE INCUBATION OF DEVICE BIOLOGICAL TEST INDICATORS USED FOR BOTH ETHYLENE OXIDE AND STEAM STERILIZATION TORS.

It incubates the steam indicators at 37 C and the steam indicators at 55 C. Ethylene oxide indicators are in the left holes, steam indicators are in the right holes. has been placed. Two sides work independently and on-off buttons and thermostats are separate. Indicator Slot: for 37 C, 10 for 55 C, 10 for Hole Sizes: Ø = 12.5 mm, h = 35 mm. Incubator Temperature: For EO indicators, 37 C For steam indicators, 55 C Temperature Deviation: ± 2 C Temperature Control: Independent thermostatic Instrument Sockets Material: Aluminum Operating Voltage: 220 Volt 50 Hz ±% 10 Energy Consumption: 150 watts max. NEUTRALIZATION (SCRU



	ETHYLENE OXIDE GAS STERILIZERS MODEL: EOSTD_KRT 135 DEFINITION These devices are heat and cold sterilization, 100% ethylene oxide gas. It is designed to perform in disposable cartridges. E T O _ K R T 1 3 5 m o d e l i h e a 100 g metal cartridge for sterilization Sterilization process 37 C, 45 C, It occurs at 55 C or 60 C. The user can select any of these options with the touch keys on the control panel. Standard programs above In addition, the device has a user-defined interface where the user can define the temperature and time. I also have a prog am. This option allows sterilization between 33 ° C and 60 ° C. The sterilization circle has a prismatic structure and its internal dimensions are 40cm x 40cm x 85 cm (length x width x depth). TECHNICIAL SPECIFICATIONS CABINET SIDE: Prismatic (135 liters) CABINET AND DOOR AK MATERY ALI: AISI 316 L stainless steel STERILIZATION TEMPERATURE: 33 C - 60 C can be selected with 1 C intervals (max. Deviation: ± 1 C) HUMIDIFICATION: ~ 40% RH (provided by built-in steam generator) CYCLE TIME: (Except the ventilation phase) for 37 C; 7½ hour For 45 C; For 6 hours 55 C; For 4½ hour 60 C; 4 hours STERILIZATION PRESSURE: Sterilization takes place under vacuum under ~ -0.3 bar pressure VACUUM SYSTEM: V acum is provided by built-in water ring and silent vacuum pump BLEEDING TIME: It can be selected by the user between 0-99 hours with 1 hour intervals. CONTROL SYSTEM: Touch user interface, with the help of µ-processor based control panel DISPLAY: LCD graphic display with fluorescent backlight (blue) LOADING: With two adjustable height, perforated stainless steel (AISI 316L) shelves PRINTER: Documenting confirmation of 24 column printer sterilization using for ELECTRICAL SUPPLY: 380 Volt, 50 Hz ± 10% three-phase mains voltage. ENERGY CONSUMPTION: 4 KW (max). MODEL: EOSTD_KRT 250 LARGE CAPACITY ETO STERILIZER (USES ETO GAS CARTRIDGE FOR STERILIZATION) &INNER DIMENSIONS: CAP ACID: 250 liters 167-170 gr standard ETO gas for each sterilization cartridge used Single or double door options Same function and control systems as ETO_KRT 135 has. 50cm x 50cm x 100cm (length x width x depth). MODEL: EOSTD_300-550 EOSTD 300-550 series ethylene oxide gas sterilizers produced by our company It is specially designed for the sterilization of disposable medical materials and equipment that cannot be sterilized at high temperatures. It uses a mixture of ethylene oxide-carbon dioxide gas for sterilized acid. The ratio of the mixture varies from 15% ETO - 85% CO to 90% ET O - 10% CO according to the user's request. Simple use, easy maintenance and service features, reliable security measures It forms the main unit and the latest technology is used in the production of the systems. The loading and unloading of the sterilization cabinet, programming and use of the sterilizer is very short by a minimum of personnel. EOSTD 300 - 550 series sterilizers are produced in 2 different standard models according to their sterilization capacity. Sterilization cabinets are prismatic. Functional and usage characteristics are the same sterilizers are produced upon request). EOSTD 300 - 550 series ethylene oxide gas Sterilizers are used at 4 different temperatures that can be selected by the user (37 C, 45 C, 55 C and 60 C). There is also a "user-defined program" that the user can choose between 33 C - 60 C. When the temperature is selected, I The sterilization time is determined automatically. EOSTD 300: Sterilization capacity of 300 liters (50 cm X 50 cm X 120 cm - uXgXd). EOSTD 550: 550 liters sterilization capacity (60 cm X 60 cm X 155 cm - uXgXd). TECHNICIAL SPECIFICATIONS CABINET SIDE: Prismatic (300-550 liters) CABINET AND DOOR AK MATERY ALI: AISI 316 L stainless steel STERILIZATION TEMPERATURE: 33 C - 60 C can be selected with 1 C intervals (max.deviation: ± 1C) HUMIDIFYING: ~ 40% RH (provided by built-in steam generator) CYCLE TIME: (Except the ventilation phase) For 37 C; 7½ hour For 45 C; 6 hours For 55 C; 4½ hours For 60 C; 4 hours STERILIZATION PRESSURE: Sterilization takes place below (+0.8) - (1.8) bar pressure depending on the gas mixture type. V ACUM SYSTEM: V acum is provided by built-in water ring and silent vacuum pump. BLEEDING TIME: It can be selected by the user between 0-99 hours with 1 hour intervals CONTROL SYSTEM: Touch user interface, with the help of µ-processor based control panel DISPLAY: LCD graphic display with fluorescent backlight (blue) LOADING: With two adjustable height, perforated stainless steel (AISI 316L) shelves PRINTER: Document confirmation of 24 column printer sterilization using for ELECTRICAL SUPPLY: 380 Volt, 50 Hz ± 10% three-phase mains voltage. ENERGY CONSUMPTION: 10-12 KW (max). MODEL: EOSTD_KRT 40 (mini etho gas sterilizer) These devices are designed for sterilization using 100% ETO gas cartridges for low capacity applications. Ethylene oxide gas 30 g standard ETO gas The sterilization chamber is cylindrical and its dimensions are 35 cm x 40. It is made of cm (diameter x depth) and AISI 316 L quality stainless steel. The cover is also made of the same material. The lid gasket is made of a special silicone mixture. The outer coating is painted with electrostatic paint and this paint provides superior protection against acidic and basic environment. Approximate outer dimensions are 65 cm x 50 cm x 65 cm. (length x width x depth) Sterilization process is carried out with standard programs at 37 C and 55 C, depending on the user selection. TECHNICIAL SPECIFICATIONS Sterilization Capacity: 40 liters Cabinet Dimensions: 35cm x 40cm cylindrical (diameter x depth) Outer Dimensions (approx.): 65cm x 50cm x 65cm (length x width x depth) Sterilization Temperature: Cold: 37 C, hot: 55 C Gas Per Sterilization: 30 g, 100% ethylene oxide gas (cartridge) Sterilization Time: Cold mode: 7 hours, hot mode: 4 hours Process Control System: Microprocessor based control Material: AISI 316L quality stainless steel Electrical Supply: 380 volts, 50 Hz ± 10% three phase Energy Consumption: Maximum 2 KW. Water Source: Tap water (1/2 "pipe) Drain: 1/2 "out of the main drain INDUSTRIAL TYPE, LARGE CAP ACID ETO GAS STERILIZATION TORS USE ETO-CO GAS MIXING CYLINDER FOR STERILIZATION. CAPACITY: 1 m - 10 m EX-proof electrical installation and structure All program parameters can be controlled by the user. PC synchronization can be achieved with the software provided. (RS 485 connection) Includes validity programs. For dimensions and features of this model, please contact the manufacturer or dealer. USE FOR THE INCUBATION OF DEVICE BIOLOGICAL TEST INDICATORS USED FOR BOTH ETHYLENE OXIDE AND STEAM STERILIZATION TORS. It incubates the steam indicators at 37 C and the steam indicators at 55 C. Ethylene oxide indicators are in the left holes, steam indicators are in the right holes. has been placed. Two sides work independently and on-off buttons and thermostats are separate. Indicator Slot: for 37 C, 10 for 55 C, 10 for Hole Sizes: Ø = 12.5 mm, h = 35 mm. Incubator Temperature: For EO indicators, 37 C For steam indicators, 55 C Temperature Deviation: ± 2 C Temperature Control: Independent thermostatic Instrument Sockets Material: Aluminum Operating Voltage: 220 Volt 50 Hz ±% 10 Energy Consumption: 150 watts max. NEUTRALIZATION (SCRU